BATTERY DRIVE, FTP-608 Series
2” HIGH SPEED THERMAL PRINTER
FTP-628 MCL101/103, Easy Loading Method
■ OVERVIEW
The easy loading FTP-608 MCL Series is ultra compact high
speed, battery driven thermal printer, printing on 2-inch wide
paper (58mm) where platens are removable. Our original
platen removal mechanism improved paper loading and
maintenance.
The FTP-608 MCL series can be used for a variety of
applications, such as portable terminals, POS, ticket issuing
terminals, label printers, banking terminals, and
measurement and medical equipment.
■ HIGHLIGHTS
• Easy loading type
Our original platen removal mechanism improved paper
loading and maintenance.
• Ultra compact
Height 15.5 mm, width 70.3 mm, depth 33.0 mm for the 2
inch model.
•
High speed printing
It can print at 60 mm/s (480 dotlines/s) maximum by using
Fujitsu's unique head drive control.
• High resolution printing
8 dots/mm of resolution printing is possible.
1
FTP-628MCL101/103
■ SPECIFICATIONS
Specification
Item
FTP-628MCL101/103
Interface
Conforms to RS232C / Centronics
4.2 VDC to 8.5 V, average current 0.87A (0.93),peak value
Printing ratio: 12.5%, printing speed 50mm/sec. at 7.2 V
For print head
Operating
Voltage
For motor
4.2 VDC to 8.5 V, 1 A maximum
5 VDC ± 5%, 0.1 A maximum
70.3 x 33.0 x 15.5 mm (WxDxH)
69.3 x 52 x 15mm (WxDxH)
Approximately 42g
For logic
Printer mechanism
Interface board
Printer mechanism
Interface board
Dimensions
Weight
Approximately 20g
Pulse resistance: 100 million pulses/dot (under our standard
conditions). Abrasion resistance: paper traveling distance
50km (print ratio: 25% or less)
Head life
Operating temperature*
Operating humidity
Storage temperature
Storage humidity
0˚ C to +50˚ C
20 to 85% RH (no condensation)
-20˚ C to +60˚ C (paper not included)
5 to 95% RH (no condensation)
Operating
environment
Head temperature
detection
Detected by thermistor
Detection
function
Paper out/mark detection Detected by photo-interrupter
High sensitive paper:
TF50KS-E4 (Nippon Paper)
TK50KS-E (Nippon Paper)
PD150R (Oji Paper)
Standard paper:
FTP-020P0701 (58mm)
TK60KS-F1 (Nippon Paper)
FTP-020P0102 (58mm)
Medium life storage paper: PD170R (Oji Paper)
Recommended thermal sensitive paper
AFP220VBB-1 (Mitsubishi
Paper)
PD160R-N (Oji Paper)
AFP-235 (Mitsubishi Paper)
TP50KJ-R (Nippon Paper)
HA112AA (Nippon Paper)
Long life storage paper:
*+5˚C to +40˚C printing density assurance rance (-25 to 70˚C capability)
3
FTP-628MCL101/103
■ FUNCTION
Item
Item
8. Mark detection function
9. MCU operation abnormality detection
1. Test print function
2. Paper out detection
3. Paper near end detection
10. Power ON/OFF sequence protection
11. Motor over-current protection
12. Hardware timer
Thermal head temperature abnormality
detection
4.
5. Blow-out fuse detection
6. Head voltage abnormality detection
7. Motor power saving function
■ DIMENSIONS
1. Printer mechanism: 2- inch
FTP-628MCL103
FTP-628MCL101
center of paper
center of paper
58.0
58.0
24(paper end sensor)
24(paper and sensor)
10.7
10.7
15.5
15.5
4.6
62.2
64.7
65.6±0.1
66.7
62.2
64.7
65.6±0.1
4.6
Unit: mm
Note: 1. Dimensions are nominal value (tolerance ±5 unless otherwise specified).
2. Dimension listed in ( ) is for reference
4
FTP-628MCL101/103
■ DIMENSIONS
2. Interface board
Unit: mm
5
FTP-628MCL101/103
■ PRINTER CONNECTOR (FLEXIBLE PT BOARD) PIN ARRAYS
FTP-628 MCL101/103
Thermal head, control circuit side connector: 52610-3090 Molex or equivalent product
No
1
Signal
I/O Contents
PHK
—
I
Cathode for photo interruptor
2
VSEN
PHE
paper sensor power
3
O
Emittor for photo interruptor
4
N.C. (101)/ SW1 (103) —/I Platen release switch
N.C. (101)/ SW2 (103) —/I Platen release switch
5
6
VH
—
—
I
Head drive power
7
VH
8
DIN
CLK
Data in
9
I
Synchronous clock for communication
10 GND
11 GND
12 STB6
13 STB5
14 STB4
15 VDD
16 TH
—
—
I
Ground power supply for thermal head
Thermal head energizing control signal
I
I
I
Logic power
O
O
I
Thermally sensitive resistor input termnial 1
Thermally sensitive resistor input termnial 2
17 TH
18 STB3
19 STB2
20 STB1
21 GND
22 GND
23 LAT
24 DO
I
Thermal head energizing control signal
I
—
—
I
Ground power supply for thermal head
Data latch
Data out
O
I
25 VH
Power supply for thermal head
26 VH
I
27 MT/A
28 MT/A
29 MT/B
30 MT/B
I
I
Stepping motor excitation signal
I
I
Do not plug or unplug the FPC when power is on.
6
FTP-628MCL101/103
Europe
Japan
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Fujitsu Components
International
Headquarter
Offices
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: info@fceu.fujitsu.com
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: promothq@ft.ed.fujitsu.com
Asia Pacific
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#04-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 6375-8560
Fax: (1-408) 745-4970
Fax: (65) 6273-3021
Email: fcal@fcal.fujitsu.com
Email: marcom@fcai.fujitsu.com
© 2004 Fujitsu Components America, Inc. All company and product names are trademarks or registered
trademarks of their respective owners. Rev. 11/15/2004.
7
|
Eicon Networks Network Card DMV600BTEC User Manual
Excell Precision Scale wwwexcellcomtw excell_en uploads product 200712 User Manual
Extron electronic Universal Remote MLC 62 RS EU User Manual
Focal Car Speaker 25 A1 User Manual
Franklin Industries LLC Beverage Dispenser FWC36 User Manual
FujiFilm Camcorder 16125864 User Manual
Gaggenau Microwave Oven BM281 User Manual
Gaggia Espresso Maker Espresso Cappuccino Maker User Manual
Gefen Switch EXT DVI 848 User Manual
GE Telephone 29480C User Manual