Everpure Water Dispenser EV9637 02 User Manual

EV9637-02

MicroGuard™ Pro 4 Filter

Delivers premium quality drinking water for bottleless coolers and

drinking fountains

B E N E F I T S

Everpure's multi-stage filter for drinking water

applications combines membrane and carbon

block technology for superior filtration results

down to 0.15 microns

Capillary membrane filtration reduces 99.9999%

of bacteria, asbestos fibers, and cysts such as

Cryptosporidium and Giardia

Submicron filtration reduces dirt and particles

Delivers taste, odor and chlorine reduction

Reduces wear and abrasion on coolers and other

water-using equipment

Sanitary cartridge replacement is simple, quick

and clean. Internal filter parts are never exposed

to handling or contamination

MicroGuard™ Pro 4 Replacement Cartridge:

EV9637-02

A P P L I C A T I O N / S I Z I N G

I N S T A L L A T I O N T I P S

O P E R A T I O N T I P S

Never use saddle valve for connection

Use 3/8” water line

Change cartridges on a regular 6 month

preventative maintenance program

For coolers and drinking water applications

Rated Capacity: 3,600 gallons (13,600 L)

Change cartridges when capacity is reached or

when pressure falls below 10 psi

Install vertically with cartridge hanging down

Allow 2-1/2” clearance below the cartridge for

easy cartridge replacement

Service flow rate must not exceed 1 gpm

Always flush the filter cartridge at time of

installation and cartridge change

Flush MicroGuard™ Pro 4 cartridge by running

water through filter for three minutes at full flow