Locate Remote Control Switch
Model Ei 159
Remote Locate capability
For use with Ei140/Ei150/Ei160RC series Smoke
and Heat Alarms
Quickly locates source of alarm
Product Description
Operation
The Ei159 is a switch with Locate functionality, and is
intended for installations with interconnected smoke
alarms.
Turning on the “Locate” switch will deactivate all
interconnected Smoke and Heat Alarms except
those actually sensing smoke
The Locate function will stop all the units alarming except
those alarms actually sensing smoke, by disabling the
interconnect feature for about 10 minutes.
The Ei159 automatically restores the interconnect
feature after a period of 10 minutes
During the 10 minute period, each individual smoke
detector will still operate and alarm if it senses
smoke
The Locate function will allow the source of the alarm to
be quickly located and appropriate action taken, and it
can significantly reduce the annoyance to other
occupants when false alarms occur at night.
If the original smoke alarm continues to sound after
smoke has cleared, pressing the “Locator” switch
again will cancel that alarm
The Ei159 is designed to be used in conjunction with the
Ei140, Ei150 and Ei160RC series Smoke and Heat
Alarms. (Note: A more suitable accessory for the
Ei160RC series is the Ei1529RC remote control switch
which provides, test, hush and locate functions)
The Ei159 is supplied complete with its own surface
mount pattress and all mounting fixings.
Shannon Free Zone, Shannon, Co. Clare, Ireland.
Ph.+353 61 471277 Fx.+353 61 471053
Email. [email protected]
E & OE As our policy is one of continuous product development, we reserve the right to alter product details without prior notice.
Ei159 DataSht RevA
|