EVID C12.2 Ceiling
12”Two-Way
Coaxial Ceiling
Loudspeaker System
Key Features:
•
•
High 100 dB Sensitivity
Wide, Smooth 85 Hz - 18 kHz Frequency
Response
•
•
•
High 100W Power Handling
4 Pin Quick Disconnect Phoenix Connector
Integrated 3/8”Threaded Rod and Pendant
Mount Rigging Points for use in Open
Ceiling Installations
•
•
64W Transformer with Automatic Saturation
Compensation for 70V/100V Operation
IncludesTile Bridge and Mounting Ring for
Easy Installation intoTile Ceilings
Technical Specifications:
Freq. Response (-3 dB): 85 Hz - 18 kHz
Freq. Range (-10 dB): 65 Hz - 20 kHz
Axial Sensitivity: 100 dB (SPL 1W/1m)
Max Calculated SPL: 126 dB
Power Handling (8 Ohms): 100W RMS
Power Handling (70V): Up to 64W
Power Handling (100V): Up to 64W
General Description:
The Electro-Voice ® EVID C12.2 loudspeaker system is a
high efficiency two-way ceiling loudspeaker package for high
ceiling applications. The loudspeaker features the EVID 920-
8B transducer, a 12" coaxial with high power handling and
100 dB sensitivity. The integrated 64W transformer allows
for use in 70V/100V applications, and includes automatic
saturation compensation. Transformer tap selection is via
a convenient switch on the front baffle. The perforated grille
is finished in semi-gloss white powder-coated enamel. The
baffle and bezel are constructed from UL 94V-0 rated ABS.
The rear enclosure is constructed from heavy gauge steel,
and is has a durable black powder-coat that blends in when
used in open ceiling applications. The rear enclosure
provides an optimum internal volume for extended low-
frequency performance. The C12.2 can be suspended by an
integrated 3/8" rigging point for use with threaded rod, or it
can be mounted using the 3 pendant mount tabs on the rear
enclosure. A rear cover, with provisions for a junction box
fitting, provides access to a 4-pin phoenix type connector
that allows direct connection to the speaker with 12 gauge
wire and provides pass through to additional speakers. A
tile bridge is included for safe suspension of the C12.2
ceiling systems in a drop ceiling that uses mineral wool, or
other fiber-based ceiling tiles.
Impedance: 8 Ohms nominal (transformer bypass)
Crossover Frequency: 2 kHz
Rec. Highpass Frequency: 60 Hz
Transducer: 920-8B, 12 in. (305 mm) High-
Efficiency Coaxial Driver
Transformer Taps: 70V: 4, 8, 16, 32 or 64W with ASC
100V: 8, 16, 32 or 64W with ASC
Bypass: 8 Ohms Nominal
Connectors: Phoenix type removable, with screw
terminals and "loop-thru", accepts
12 AWG wire
Enclosure Material: Backcan: Powdercoated Steel
Baffle/Bezel: UL 94V-O rated ABS
Grille: Perforated powder coated steel with
safety tether
Mounting System: Integrated 4-point toggle anchors
Integrated 3-point pendant mount
Integrated 3/8" threaded rod
Additional secondary mount
Support Hardware: Tile bridge, backing plate support,
cutout template, paint shield
Dim (Depth x Dia.): 13.12" x 16.31"
(333mm x 414mm)
Cutout Diameter Size: 15.20" (386mm)
Net Weight: 27 lbs (12.3 kg)
Shipping Weight: 32 lbs (14.5 kg)
All Specifications based on Half Space Environment in ceiling.
|
Continental Refrigerator Refrigerator SWF27 BS FB User Manual
Craftsman Power Hammer 57261083 User Manual
Crate Amplifiers Speaker System bt25 bt50 User Manual
Creda Electric Heater Advanced Control Heating Systems User Manual
Curtis Convection Oven RMW1172 User Manual
Curtis Portable CD Player CD226 User Manual
Delta Electronics Power Supply SI106 User Manual
Everpure Water System CG53 10 User Manual
Freecom Technologies Network Cables Dual Drive Network Center User Manual
Fundex Games Board Games Michigan Rummy User Manual